Maretron Fuel Flow Sensor 8-10 LPM/2.1-18.5 GPM - M8AR fender line cleat Heavy-Duty Blades: Constructed from 12-gauge

Heavy-Duty Blades: Constructed from 12-gauge 304 stainless steel with a 5/8" flared trailing edge for ultimate strength and minimal flex under high-speed pressure

Keep valuables (wallets

Designed to safely and efficiently remove marine pump impellers up to 2-1/4 inches in diameter

The Star brite Microfiber Reggae Wash Mitt is designed with the user in mind

Customizable user settings allow you to choose from 5 available display configurations for sailboat or powerboat user profiles: single

Maretron Fuel Flow Sensor 8-10 LPM/2.1-18.5 GPM - M8AR fender line cleat Heavy-Duty Blades: Constructed from 12-gaugeFuel Flow Sensor 8 10 LPM 2. 1 18. 5 GPM When fluid passes through the sensor, the rotors turn. Magnets which are located in the rotors will pass across sensors in the sensor circuit board. Pulses from these sensors are transmitted to the FFM100 which performs flow rate calculations based on the received pulses. Specifications: Construction: Housing Material Aluminum Port Size: 3 4" NPT Female Maximum Viscosity: 1000 cPs Strainer Size: 60 Mesh (If not