2.5" OD X 6" Long Rubber Elbow 45 Degree About 1-1/2 inches on each

About 1-1/2 inches on each end goes inside an intake hose (minimum 1 inch)

This spring-loaded T-bolt clamp is used on 3-3/4" ID (5-ply) silicone hoses

and then the 2-1/4" intake tube fits in the hole

Five-ply reinforced silicone for high strength

Mill finish (as it arrives at our location from the mill after traveling on a truck and being handled several times) – may have minor defects and small scratches

2.5" OD X 6" Long Rubber Elbow 45 Degree About 1-1/2 inches on eachStandard aluminum intake tubing. 6061T6 alloy . 065 wall thickness. Cuts easily with a hack saw. About 1 1 2 inches on each end goes inside an intake hose (minimum 1 inch). Mill finish (as it arrives at our location from the mill after traveling on a truck and being handled several times) may have minor defects and small scratches, but no dents or major defects. Made in USA.