Silicone Hose, 3 1/2 x 2 3/4 inch ID Straight Reducer Metric_54mm The 4-ply reinforcement results in

The 4-ply reinforcement results in a working pressure rating in excess of 26 psi and a 5mm wall thickness (80mm / 3 1/8" OD)

These 45 degree reducer elbow hoses have a 35mm ID at one end and a 32mm ID at the other end to connect a 1 3/8" OD tube to a 1 1/4" OD tube

Four layers of aramid reinforcement and 3 reinforcing rings allow operating pressures of 71 psi (284 psi burst pressure) and temperatures up to 500° F (260° C)

These 180 degree elbows have a 3/4" ID with a smooth

Use with our Lined Hose Clamps (Part No

Silicone Hose, 3 1/2 x 2 3/4 inch ID Straight Reducer Metric_54mm The 4-ply reinforcement results inOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). The outside has a smooth, shiny, "wipe down" finish that is easy to keep clean. These straight reducer hoses are approximately 5 inches long