Silicone Hose, 4.00 x 3 1/2 inch ID Straight Reducer t When you need to remove

When you need to remove a Gates PowerGrip SB Hose Clamp after shrinking

5mm wall thickness (113mm / 4 7/16" and 100mm / 3 15/16" OD) and a working pressure rating over 8 psi (42 psi burst pressure)

Double the utility of your Redback Performance Silicone Hose Cutter (Part No

This hose is built for endurance and performance in custom coolant and turbo intake plumbing applications

The 3-ply reinforcement results in a 4mm wall thickness (27mm / 1 1/16" and 24mm / 15/16" OD) and a working pressure rating over 50 psi (250 psi burst pressure)

Silicone Hose, 4.00 x 3 1/2 inch ID Straight Reducer t When you need to removeOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). The outside has a smooth, shiny, "wipe down" finish that is easy to keep clean. These straight reducer hoses are approximately 5 inches long