Takaab SMULTI-1U Switched Passive Multiple Passive There are also headers on

There are also headers on the boards that allow for normalizing the RESET and CLOCK IN jacks of the adjacent clock dividers

The result is A*B effectively kicks out the sum and difference between the frequencies of the two input signals

Both of our clock dividers together at 10% off

when self patched for example from AC output into CV input can be used to modulate curve to be linear or exponential

The TUNE control allows for trimming of the pitch by half an octave up and down while PULSE WIDTH sweeps the duty cycle of the square wave from 50% to just under 100% positive

Takaab SMULTI-1U Switched Passive Multiple Passive There are also headers onThis passive module works as a 1 in 6 out multiple or as two smaller multiples. Any signal or voltage put into the top input will be split between the 6 outputs of the module. When a signal or voltage is added into the lower input, this creates two separate multiples So the top input is then split between the top three outputs, and the lower input is split between the bottom 3 outputs. As this is a passive module, expect some drop in level. However,