2200 Watt Stainless Steel Heating Element (220-240V) you would just end up

you would just end up with pure

Too higher power directly in contact with your malted grain can cause scorching/off flavours as the temperature may not be evenly distributed and isolated purely around the element itself

BOIL TIME CALCULATORBoil Time Calculator Volume: litres gallons Energy: watts BTU/h Start Temp: °C °F End Temp: °C °F (Water boils at: 100°C/212°F)Efficiency:%Time to Temp: minutes

au The whole system is designed to save

We highly reccomend using EVABarrier 4mm x 8mm or 5mm x 8mm with duotight fittings

2200 Watt Stainless Steel Heating Element (220-240V) you would just end upThese 304 Stainless 2200w Weld Less Elements are designed to fit a 32mm Hole inside the wall of your brewing vessels or boilers. It does not come with the power cord (part code: KL03520). Attachment guide: Element goes inside vessel with washer attached, then push through the electrical cord through the 32mm hole. Then pull over large hex nut over the electrical cord and tighten from the outside. Spare silicone seals can be purchased here These